"PRO-SERIES" Baluns
 | Reduce coax & harmonic radiation that can cause interference to yourself & your neighbors. |
|
The baluns let your antenna radiate instead of the feedline. |
|
Lightweight |
|
Deluxe connectors require NO soldering, NO jumper wires. |
|
Equipped with S0-239 receptacle, that accepts the standard PL-259 connector. |
|
Stainless Steel eye-hook for easy mounting. |
| MODEL | Impedance Ratio | Frequency Range(Mhz) | Power(watts) | Use | Price
$US |
| PB-1 | 1:1 | 3--35 | 1500 | Dipoles,slopers,inverted "V"'s, Beams, verticals, etc. "Voltage Type" | $36.95 |
| *PB-1-C | 1:1 Current | 1.4--200 | 3000 | Same as PB-1, only "Current Type" | $36.95 |
| **PB-4 | 4:1 | 3--35 | 1500 | Balanced line to coax; folded dipole | $36.95 |
Prices shown are in U.S. dollars
*The PB-1-C is a current type balun, rated at 3000 watts+, it also covers160 meters & 2 meters. (1.4/200 Mhz) where as the PB-1 will not. The PB-1-C is very rugged, & almost impossible to over heat when running high SWR's. Works well with the AS-2 & A-10.
**The PB-4 is popular for matching 450 ohm "Ladderline" to coax cable. Works great with our model AS-2 All Band Antenna.
***********************************
1:1 Ratio $36.95
Covers 1.0 Mhz. thru 400 Mhz. - 2000 Watt RatingMinimizes Coax & Harmonic radiation by letting your
antenna radiate instead of the feedline! Stop interfering with your neighbors &
yourself! Reduces TVI & RFI.
Virtually Impossible to overheat or burn out! Broadband, Great for dipoles,
slopers, inverted "V"'s, Beams; any antenna that is coax cable fed.
Lightweight, sealed & Weatherproof.
Simply install in-line with the antenna feedline. Normal placement is close to
the antenna.
Has SO-239 receptacles, that accepts the standard PL-259 coax connectors.
Use with all 50 or 75 ohm coax cables. Instructions Included.
© 2001, - 2008 Spi-Ro Manufacturing, Inc.
No part of this web site can be copied without written permission. All Rights Reserved.
Site updated 3/23/2008